Laser cutting
G-Weike LF-6025GH
- Carbon steel
- 1–50 mm
- Stainless
- 1–40 mm
Our workshop in Burgas
We cut, form, weld and blast steel in our own facility, commissioned in 2020, with an open production yard next to it.
- 3,200m²Covered production facility, 68 × 48 m
- 3,000m²Open production yard
- 80–100tSteel structures per month, plus 30–40 t of pipe spools
- 2 × 8tOverhead cranes, plus 4 × 5 t
Production facility and yard
Workshop data (2026)
- Address
- 6 Salzata Str., Industrial & Logistics Park, 8000 Burgas, Bulgaria
- Facility
- 68 × 48 m, 3,200 m² covered production area
- Yard
- 3,000 m² open production yard
- In operation
- Since 2005, current workshop since 2020
- Output
- 80–100 t/month steel structures, 30–40 t/month pipe spools
- Shipped 2026
- Reactor R-40 for a chemical plant, 50 t, 321 stainless steel
New production facility
We are building a new production facility with 5,000 m² of net production area for our clients' orders. The steel frame went up in 2026.
- Production floor
- 5,000 m² net production area
- Status
- Under construction, steel frame erected in 2026
- Existing facility
- 3,200 m², in operation since 2020
Machine park
Main equipment as listed in our 2026 workshop presentation.
Plasma and oxy-fuel cutting
Air Liquide Oxytome 25 HPC
- Carbon steel, plasma
- 3–25 mm
- Carbon steel, oxy-fuel
- 3–120 mm
- Stainless, plasma
- 1–18 mm
CNC profile drilling
CMA BRD 12000
- Work
- CNC drilling of steel profiles
Orbital pipe welding
Lincoln Electric automatic orbital welder
- Pipe size
- Up to Ø 610 mm
Plate rolling and shearing
Plate bending rolls and guillotine shear
- Rolling
- Plates up to 2.5 m wide and 18 mm thick
- Shear
- Carbon steel ≤ 16 mm, stainless ≤ 12 mm, 3 m length
Profile cutting and press
Profile cutting machine and Enerpac press
- Profiles
- Up to 323 mm high and 600 mm wide
- Press
- 50 t hydraulic
Sandblasting
In-line sandblasting machine
- Passage
- 2,000 × 600 mm
21 welding stations
MIG/MAG, TIG and MMA
- Lincoln Electric
- 10
- Air Liquide
- 4
- KempoMat
- 3
- Lorch
- 2
- ESAB
- 2
Lifting and transport
We load and deliver with our own cranes and trucks.
Overhead cranes
2 × 8 tand 4 × 5 t
- 8 t
- 2 overhead cranes
- 5 t
- 4 overhead cranes
- Floor
- Forklift
Mobile cranes
80 tlargest of four
- 80 t
- 1 mobile crane
- 35 t
- 1 mobile crane
- 15 t
- 2 mobile cranes
Trucks and lift platforms
40 ttruck
- Trucks
- 1 × 40 t, 1 × 15 t
- Access
- 2 aerial lift platforms
How an order moves through our shop
The usual sequence for equipment that we fabricate, deliver and erect ourselves.
-
Engineering review
We review the drawings and standards with you and agree the inspection and test plan before fabrication starts.
Send drawings for review -
Cutting, rolling and welding
Laser cutting up to 50 mm, plasma cutting up to 25 mm, oxy-fuel cutting up to 120 mm, CNC drilling and plate rolling. Welding is coordinated to EN ISO 3834-2.
Machine park -
Inspection and testing
Hold and witness points are open to your inspectors. For PED items, the notified body takes part as well.
Certificates and quality control -
Oversized transport
Oversized loads go on lowbeds, for example the 50 t Reactor R-40 and the sections of a furnace combustion chamber. Standard loads go on our own trucks.
Reactor R-40 for a chemical plant -
Site erection
Our own crews and cranes erect the equipment and make the tie-ins on site. We also work inside operating refineries, chemical and power plants.
Pressure equipment and electrofilter for a wood processing plant -
Handover documents
Material traceability records and the DoC or DoP are handed over with the equipment, with the CE marking where PED or EN 1090 applies.
Quality documentation
Workshop and machines 2026
Our 2026 presentation of the facility, machine park, lifting equipment and capacity, for vendor qualification. PDF, 1.1 MB. Certificates and registrations are on the Quality page.
Request a quotation
Send us your enquiry with all the necessary or available documentation. We reply in English, German and Bulgarian.
